“Horst” grease tool for wheel bearing Polaris

70,00  70,00 

JAY PARTS “HORST” – Lubrication for wheel bearing Polaris 44mm

100% Made in Germany
Lubrication of wheel bearings made easy
grooved handle

In stock (can be backordered)

Delivery time: 2 - 5 days

HORST - Jay Parts Lubrication tool for wheel bearing Polaris 44mm

With "Horst" you can lubricate the wheel bearings without dismantling the axles or suspension components. Simply remove the wheel, caliper and hub, insert the tool into the bearing and grease the bearing with 3-5 strokes (commercial grease gun).

The covered design with conical pitch and an O-ring prevents the excape of grease when lubricating. Made of high quality aluminium 2007.

OUR RECOMMENDATION
Belray Waterproof Grease

WORKS WITH THE FOLLOWING MODELS
- Polaris Scrambler 850 & 1000
- Polaris Sportsman 850 & 1000
- Polaris Sportsman 550
- Polaris RZR 900 & 1000 & 4 Seater
- Polaris RZR 800 S Front ( not Model end of 2010)
- Polaris RZR 800 Front 2011-2014
- Polaris Ranger Front 800 & 900 2010 – 2018
- Polaris General all

APPLICATION

„HORST“ ‐ LUBRICATING TOOL WHEEL BEARINGS POLARIS

Horst Abschmierwerkzeug Polaris Radlager

WHEEL BEARING, WHY?
Polaris use split wheel bearings where you can also see the grease as wear. Depending on the application, the grease may more or less escape (wear).

CHECK
Quite simple: if you wobble on the wheel and a play is noticable.

HELP
What can you do? Lubricate the wheel bearing with “Horst”

HOW DO I BRING “HORST” TO HIS WORK?
Lift up vehicle –  dismantle wheel – remove the pin from the axle nut – remove axle nut (we recommend impact wrench) – brace caliper screw dismantling (15mm wrench) – move brace caliper a little bit to left and right side (opens the brake pads ) – pull the wheel carrier off – put „ Horst “ in the steering knuckle  –  pump 5-8 times grease with a grease gun inside – put back together again

TROUBLESHOOT

  • „Horst“ is not tight >> push „Horst“ in firmly
  • „Horst“ is not going to take out >> pry off with a large screw driver
  • the outer wheel bearing shell comes off >> replace wheel bearing
  • wheel bearing still has play >> replace wheel bearing

RECOMMENDATION

  • use the best water-resistant grease! You can find  Waterproof Grease by Bel Ray at the shop
  • renew pins

TORQUE

  • Axle nut 108 NM (renew pin)
  • brake calipper nut 50 NM

WHY ONLY 5‐8 TIMES GREASE WITH THE GREASE GUN?
Too much grease in the wheel bearing creates an increased frictional resistance. It can rise the temperature in the bearing and this is a negatively affect of the life of the bearing.

Download application PDF

Reviews

There are no reviews yet.

Show reviews in all languages (1)

Add a review

Produktanfrage / Request to product: "Horst" grease tool for wheel bearing Polaris

Datenschutz-Info akzeptiert * Datenschutz-Info gelesen und akzeptiert / I have read and accept the Data protection.