JAY PARTS Bushing & Sleeves Kit A-Arms – Segway Snarler 600

JAY PARTS bushing & sleeves kit A-Arms Segway Snarler 600

The sleeves are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with oil additive was used for the bushings as a wear-resistant material made with an inner groove. The O-ring seals against dirt and water.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- PE-GL bushings with inner groove
- sealed with O-rings

DELIVERY PER KIT
8   sleeves
16 bushings (pre-assembled with O-rings)

One kit is for the front side (left & right) or the rear side (left & right). For one vehicle you need 2 kits.

WORKS WITH THE FOLLOWING MODELS
Segway Snarler 600, 2021-

ATTENTION ON ASSEMBLY!
Don´t hit the bushings with a hammer!
Put enough grease in the bushings before installation.
Please fill in grease on the grease press only until a first resistance occurs.
Grease must not ooze out!

RECOMMENDATION
We recommend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.