JAY PARTS bushing kit A-Arms front or rear - Arctic Cat/Textron Alterra 550 - 1000

The sleeves are made of hardened stainless steel, only the best is good enough for our claim!
PE-GL with added oil is used as a self-lubricating, wear-resistant material for the bushings. Sealing against dirt and water takes over an O-ring.

FEATURES
- Made in Europe
- hardened stainless steel sleeves
- stainless
- PE-GL bushings with oil additive
- sealed with O-rings

DELIVERY PER KIT
6 sleeves
12 bushings (pre-assembled with O-rings)
One kit is for both sides (left and right) rear or front. For one vehicle you need 2 kits!
Replaces part numbers: 0403-439 + 0403-289 + 0403-409 + 0403-438

WORKS WITH THE FOLLOWING MODELS
Arctic Cat / Textron Alterra 550 - 1000

ATTENTION ON ASSEMBLY
Don´t hit the bushings with a hammer!
Put enough grease in the bushings before installation.
Please fill in grease on the grease press only until a first resistance occurs.
Grease must not ooze out!

RECOMMENDATION
We reccomend using water resistant grease when installing, BEL RAY Waterproof you can find in our shop.