Steering stem reinforced – heavy duty Can Am DPS
122,44 € 122,44 €
incl. 20% VAT plus shipping costs
JAY PARTS steering stem reinforced – heavy duty Can Am DPS
handlebar increase + adjustable
Steering stem reinforcement + riser made of aluminum for Can Am Renegade + Outlander with power steering
- 100% Made in Germany
- makes your steering 200% stronger
- Handlebar increase by 13mm
- Handlebar adjustable in its position
- including longer screws
Availability : in stock
In stock (can be backordered)
JAY PARTS steering stem reinforced - heavy duty Can Am DPS
+ riser made of aluminum to fill the hollow steering stem. You strengthen the steering stem by 200% against bending during the rollover and also reduces the risk of damaging the frame.
- 100% Made in Europe
- makes your steering 200% stronger
FEATURES
- handlebar increase by 13 mm
- you can moe the handlebar forward in its position
- fits with any handlebar, series or third party
- no welding required
- longer screws included
WORKS WITH THE FOLLOW MODELS:
Can Am Outlander 2006 -
Can Am Renegade 2006 -
Not usable for vehicles without power steering!
Assembly instructions
JAY PARTS STEERING STEM REINFORCED – HEAVY DUTY CAN AM DPS
The steering stem can be pushed in without effort, then aligned and screwed. The diameter is designed for the inner diameter of the DPS (power steering) steering stem with 28mm.
The central screw oft he plat is already glued in with blue Loctite.
SCREW ASSIGNMENT:
HANDLEBAR 22 mm (standard Outlander / Renegade steel handlebar)
- Series position
Screws in the series holes 4 x M8x70 incl. 4 washers and 4 nuts
The other parts are not used!
- 22mm front mounting
4 x M8x70 inkl. 4 washers and 4 nuts
2 x M8 x 30 lens head screws incl. 2 washers and 2 nuts
The other parts are not used!
HANDLEBAR 28 mm (XXC,XT and XMR model with aluminum handlebar)
- Series position
2 x M8x40 screwas incl. 2 washers and 2 nuts in the front holes replace the original screws
2 x M8x70 screws incl 2 washers and 2 nuts in the back holes replaces the original screws
2 x M8x30 lens head screwas incl. 2 washers and 2 nuts
The other parts are not used!
- 28mm front mounting
2 x M8x30 lens head screwas incl. 2 wahsers and 2 nuts backside
2 x M8x70 screws incl. 2 washers and 2 ntus for the middle replaces the original screws
2 x M8x40 screws incl. 2 washers and 2 nuts in the front holes replacres the original screws
Reviews
Show reviews in all languages (1)
Super verarbeitetes Material und alles dabei was man für die Montage benötigt. Einfach den Lenker abmontieren und in die Lenksäule ohne viel Kraftaufwand einschieben, danach noch etwas ausrichten und wie gewünscht verschrauben. Ich habe die Verstärkung zuerst mit dem Orginal XXC Lenker eingebaut und nachdem ich meinen Faast Flexxlenker hatte hab ich das ganze auf diesen ohne weiteres umgebaut.